When you are getting started with your work with a sprayer, you definitely want the longest life out of it. But if you want that, you have to remember that maintenance is not just about cleaning, but it is about using the components that are specifically designed to handle the pressure and internal friction of the machine.
Below, we are going to thoroughly guide you on how you can properly maintain your equipment by purchasing genuine Titan parts from the All Titan Parts Official Website. Let’s get into the details without any further delay.
The Piston Care Rule
The piston is known to be one of the most active parts of your sprayer. You must manage the friction between the packings and the rod if you want to prevent premature wear. For that, you will have to add a few drops of Titan TSL to the wet cup. This will prevent the paint from drying on the piston rod, which can act like sandpaper against the packings.
You should also check for leaks. If you see the paint is bubbling up in the cup, know that your packing is completely worn out. You should immediately replace them with a genuine Titan packing kit to avoid any sort of issues.
Filtration: The First Line of Defense
If you want to have a smooth finish, you will have to get rid of the debris. It is important for you to use the correct mesh filter to prevent clogging and protect your spray tip. You must always use authentic Titan filters.
They are designed with the accurate surface area to make sure that even if they catch some amount of debris, they do not cause any pressure drop that can immediately ruin the line consistency. You should pay attention to mesh matching. You can also see a guide on the All Titan Parts Official Website to understand which mesh filters to purchase according to the tips.
Optimizing the Fluid Section
The quality of the valves and seats inside your fluid section is critical when it comes time for a rebuild. The genuine Titan kits use high-grade materials for the check balls. If you purchase generic steel valves, they can rust, which will lead to a loss of prime and pressure.
If your machine is constantly struggling to hold pressure or is leaking back into the hose, you should check for the spray valve because it is most definitely worn out. You should replace it with a genuine Titan assembly to ensure a bubble-tight seal.
Storage and System Flushing
How you decide to leave the machine after working at the end of the day is going to decide if it will start working the next day or not. After flushing the paint out of your machine with water, you should circulate the Titan liquid shield through the system. This is going to help you prevent rust corrosion and sticking while the tool is in the warehouse.
You should try to store the tips in a cleaning solution that is specifically dedicated to them to make sure the internal orifices do not get pitted by the residue.
Getting genuine parts definitely looks expensive in the beginning, but as you start working with them, you realize how it is actually an investment and not an expense. Once you invest in the genuine parts, you see an obvious difference in the quality of your work and performance.
In Conclusion
When you’re purchasing a sprayer, you should be aware of the fact that you need to get genuine parts because it is also easier to maintain them. If you get non-standard parts no matter how much you clean them, they’re not going to bring you the efficiency you require on the job site.
You also do not have to worry about getting genuine parts because they are all available on our All Titan Parts Official Website. All the parts are divided into different categories on the website, so it will also be really easy for you to find the one that you are in need of according to your sprayer type. So, do not overthink and visit our website today.